Hot-Pressed Sintering Boron Carbide B4c Nozzles for Sandblasting

• Customization: Available
• Type: Nozzle
• Feature: High Pressure
• Model NO.: B4C Nozzle
• Certification: ISO
• Condition: New
• Nozzle Material: Boron Carbide B4c
• Jacket: Aluminium, Polyurethane Protector
• Sintering: Hot-Pressed
• More Specifications: Customizable
• Method Type: Automatic, Manual
• Transport Package: Each in a Plastic Case, Total in a Carton Box.
• Specification: 5.0MM, 6.5MM, 8.0MM, 9.5MM, 11.0MM, 12.0MM, etc.
• Trademark: kumthai
• Origin: Zhengzhou, China
• HS Code: 8424909000
• Production Capacity: 100000PCS/Month

Product Description

Hot-Pressed Sintering Boron Carbide Nozzles for Sandblasting, More Specifications Customizable according to Customers' Drawings

Material: Boron Carbide (B₄C).
Jacket: Aluminum / Polyurethane Protector.

The hardness of boron carbide is only secondary to diamond and CBN. The density of the boron carbide products produced by us is close to its academic density 2.52g/cm³. The advantages are: longer service life, high hardness, high wear-resistance ability, anti-corrosion,  lower cost per use, reducing down time. It's the ideal material for sandblasting nozzle and mechanical seal.

The gas dynamics of venturi nozzle is better than straight-hole nozzle, the vortex is improved or ceased to exist, greatly reduced the pressure loss in the same pressure conditions. Abrasive exports increased to more than double the speed, efficiency than the straight-hole nozzle to increase 15% -40%, 20% lower abrasive consumption.

Boron carbide can be used to manufacture gun nozzles in the arms industry, which is extremely hard and wear-resistant, no reaction with acid-base, high/low temperature resistance, high pressure resistance, crystal system: hexagonal, density: 2.52g/cm3, Mohs hardness: 9.36, microhardness 5400-6300kg/mm2, bending strength ≥400Mpa, melting point: 2450ºC. Because it has the characteristics of wear resistance and high hardness, Boron Carbide Sandblasting Nozzle will gradually replace the known carbide/tungsten steel and silicon carbide, silicon nitride, alumina, zirconia and other materials sandblasting nozzle in the future.
 

Service Life
Nozzle Material	Service life(h, by time)
	Steel grit/shot	Silica sand	Brown aluminium oxide
Alumina	20-40	10-30	1-4
Tungsten Carbide	500-800	300-400	20-40
Silicon Carbide	600-1000	400-600	50-100
Boron Carbide	2000-2500	1000-1500	500-1000

 

Specifications
Item	Specifications (mm)
	I. D  Φd	Exit size	Length  L	Thread size
BN1902-5.0	5.0	9.0	130	2''-4-1/2 (UNC)
BN1902-6.5	6.5	10.5	135
BN1902-8.0	8.0	12.0	140
BN1902-9.5	9.5	14.0	165

 

Specifications
Item	Specifications (mm)
	I. D  Φd	Exit size	Length  L	Thread size
BN1901-6.5	6.5	10.5	135	2''-4-1/2 (UNC)
BN1901-8.0	8.0	12.0	150
BN1901-9.5	9.5	14.0	165
BN1901-11.0	11.0	15.5	190
BN1901-12.5	12.5	17.0	215

Note: Special requirement on specifications can be satisfied through discussion.


Kumthai's boron carbide nozzles can be customized according to customers' requirements. Please tell us the specifications or send us the drawings, we will make a quotation according to your drawings and send the prices for your reference.